BluCon

Say goodbye to scanning the FreeStyle Libre to get your glucose readings

Get glucose readings every 5 minutes on your phone with our mobile app*.



*LinkBluCon app for iOS and Android is available for download

Pre-order now










How it works

1. FreeStyle Libre sensor

Wear the Freestyle Libre sensor as per the instructions


Download "LinkBluCon" app from the Apple App store/ Google Play store


Launch the "LinkBluCon" app by taping on the app icon located on the phone screen.


Tap on "OK" , on Getting STARTED screen


Press the switch located in the hole on the BluCon with a blunt pin to turn it ON


A RED light will flash for a split of a second



Light will turn OFF after turning ON the BluCon

Tap on the Scan button located near bottom of the screen. If you gets message no BluCon found, tap again on the 'Scan' button. Keep doing it until displays message, it's connected and reading the data..


Enter the 6 digit passcode printed on the side of the BluCon, after the serial number


6 digit passcode is printed after the serial number. Once Blucon is connected to the app, place it above the FreeStyle Libre sensor with the help of armband to see glucose readings on the phone [Sometimes it may take up to 6 minutes before you will see first reading]


Glucose reading will be updated every 5 minutes

How to replace the battery of the BluCon Nightrider

1. Use a pin to press the switch on the side

2. The old battery will slip out from the side of the BluCon

3. Replace the old battery with the new CR2032 battery

4. Remove old battery

5. Insert new battery as shown

6. BluCon is once again ready for use